Google search engineGoogle search engine
HomeFeatures2014 Arctic Cat Trip Report

2014 Arctic Cat Trip Report

Monster Energy/Arctic Cat's Tucker Hibbert race shop. Photo by

I made a short trip to Arctic Cat last week, to spend a day with engineers who were testing snowmobiles and to capture a snapshot of what was happening at my favorite place in the world.

On the way to TRF I stopped by the Pelican Rapids Amusement Park, aka Tucker & Mandi Hibbert’s house, where I found the former in a hardcore workout with his vacuum cleaner inside his amazing race shop.

Check out the amazing helmet collection! With just a couple exceptions, Tucker has an example of every helmet that he’s raced with his entire career.

In addition to vacuuming, Hibbert is on the cusp of another season of motocross racing and training. One bike sits poised, waiting to be ridden, while another is ready for assembly.


Monster Energy/Arctic Cat's Tucker Hibbert race shop. Photo by

Monster Energy/Arctic Cat's Tucker Hibbert race shop. Photo by

Tucker’s other off-season training/racing program involves mountain bike racing. And with a sweet new Trek Superfly full-suspension in his quiver this season, it was time to prep wheels and other stuff in anticipation of the fast approaching spring.


Arctic Cat in Thief River Falls. Photo by

While it was indeed spring-like weather throughout most of Minnesota last week, it was still full-on winter in Thief River Falls, where upwards of 18 inches had fallen a couple days prior to my visit.


Arctic Cat in Thief River Falls. Photo by

The snow piled high at the Arctic Cat entrance looked as though it was early February, but the light jackets and much warmer temps told the story of a town in transition.


2015 Arctic Cat CrossTours on the assembly line. Photo by

Arctic Cat is already building 2015 model snowmobiles, with XF9000 CrossTours rolling down the assembly line this day.


2015 Arctic Cat CrossTours on the assembly line. Photo by

Designing, testing and producing snowmobiles, ATVs and side-by-sides is a year-round process. And although to some it might sound early in the year to be producing 2015 model snowmobiles, it’s actually right on schedule.

There are no photos to share of ATV and side-by-side production, however, as the company was performing maintenance and upgrades to those assembly lines.


Gary Nelson gets mad when I photograph him

I stopped by the Arctic Cat cafeteria on my way to Engineering, where I saw my good friend Gary Nelson getting his regular morning breakfast. I won’t share the expletive that he uttered at this moment as he warned me to NOT shoot the photo. Sorry, Gary.


Arctic Cat ATV engineer Adam Kuiken testing a Wildcat Trail chassis. Photo by

I visited with ATV Test Engineer Adam Kuiken for a short time, who showed me this Wildcat Trail chassis in a twist rig that simulates torsional inputs that occur when these machines are ridden at angle across plowed farm fields.

For this test, both suspensions are made “solid” via a straight bar bolted in place of the shock absorbers. The rear end is bolted down, and on the front wheel mounts is a rocker bar that cycles in an up-down motion with 1,500-ft.-lbs. of torque applied at each “twist.”

This chassis had already experienced more than 200,000 twist cycles and was nearing the end of the test, with Kuiken noting where stress fractures occurred. That information will inform the design and construction of future machines.

READ THIS INTERVIEW with Kuiken for a more detailed description of his job.


Arctic Cat engineers Mike Larson, Troy Halvorson & Andy Beavis. Photo:

After visiting with Kuiken, I headed over to Snowmobile Engineering, where Mike Larson (left), Troy Halvorson (middle) and Andy Beavis were having a discussion about the new M Series mountain sleds.

I congratulated Andy for his recent win in the Amateur class at the 2014 Jackson World Championship Hillclimb, which is an outstanding achievement by any measure! The fact that he’s a Design Engineer on Arctic Cat mountain sleds makes the situation all the better.

Each of these guys shares a passion for snowmobiling as well as the ability to ride at the highest level.


Inside Arctic Cat. photo by

Next, a trip into the Engine Shop to meet up with Greg Spaulding.

This area of Engineering houses dyno cells, a fabrication area and space for many of the sleds that are used for development.


Arctic Cat's Greg Spaulding and Steve Broten. Photo by

When I found Spaulding (left), he was busy fabricating an exhaust pipe and muffler with master fabricator Steve “Abe” Broten (right).

For the next half hour I experienced the great pleasure of watching these guys fabricate an exhaust system.


Arctic Cat engineer Greg Spaulding. Photo by

The process measuring, cutting (and rolling) sheet metal…


Arctic Cat engineer Greg Spaulding. Photo by

…followed by shaping and bending (using the same cone form from back in the Arctic Enterprises days!)…


Arctic Cat master fabricator Steve Broten. Photo by

…and welding.

These are all skills that, when performed by masters like these two, are like artwork.

It was an unexpected show that left me in awe and making promises to myself to spend more time in the shop and less time at my computer.


Arctic Cat engineers Greg Spaulding, Donn Eide and Chris Russell. Photo by

Moments after building the exhaust, it was on an engine and being tested on a dyno by operator Chris Russell (right) as Spaulding and Engine Design Manager Donn Eide watched.


Arctic Cat engineer Greg Spaulding. Photo by

After the successful test we shared a laugh as Spaulding pulled from his shop coat pocket a clutch weight that was from one of Brian Sturgeon’s Team Arctic oval race sleds!

Yes, I’m serious.


Arctic Cat engineers Kirk Hibbert and Mark Esala. Photo by

Another bit of laughter occurred a few moments later while talking with snowmobile engineer Kirk Hibbert (left) and ATV engineer Mark Esala.

We were talking about the unmatched joy of racing the I-500 (which Esala recently experienced for the first time). The laughter broke out when discussing the excruciating soreness that descends into your body after that event! But we finished the conversation by noting that, once you’ve raced it, you ALWAYS want to keep racing it (which was duly noted by the fact that Esala is keeping his race sled for next year’s event)!

And with that it was time to head home, ending another great trip.

Thanks for reading.



Please enter your comment!
Please enter your name here

Most Popular